You don’t have to fumble around your smartphone while driving.
Because, now you can easily access the smartphone while driving safely.
And also, car phone holders are very valuable accessory no matter what type of smartphone you have.
Especially if you have most compatible phone mount according to your vehicle, then this can be very easy to use as well as it becomes very stable.
So that you can easily use your smartphone while driving safely like: – you can see GPS paths, make or receive important phone calls or to listen music etc.
And all you can do without any kind of distraction that makes is safe and secure.
That’s why here’s I have choose the best phone holder according to Audi RS3 so that you can easily install it and use it comfortably.
These are The 10 Best Car Phone Holder for Audi RS3
These are some of the best car phone holder for Audi RS3 that can help you to use your cell phone easily in your RS3 and gives you freedom to take/answer calls while driving.
Now, this smartphone holder is made by Andobil, it is the 3-in-1 phone holders which can be mounted on the Dashboard, Windshield and Air-Vent Types and it is the perfectly compatible with Audi RS3.
Also, it comes with newly invented suction cup which have the suction power increased by 3 times because it features three layers of new nano-silica gel material and adopt a two-step locking mechanism which makes it extremely stable phone mount.
Along with this, its holding arms designed in triangular structure that’s why it holds your smartphone firmly like it fixes your phone from left to right to the bottom of the three directions firmly.
Besides, it has soft silicone on the holding arms & airbag design these features provide 100% full protection for your smartphone that means it won’t scratch your phone even when you’re driving on the most bumpy roads.
Moreover, Andobil Audi RS3 phone holder has extendable long arm and 360-degree swivel head, it keeps your phone always in the best viewing angle so that you can easily use your smartphone for GPS navigation & answer or make phone calls without being distracted while driving.
Now, this is the air-vent phone mount which is designed by TORRAS, it is a universal air-vent mount that is fully compatible with Audi RS3’s air-vent types.
And there are two types of clips comes with this holder. One is designed for common horizontal vents; and the other type of clip is a universal clip, which is suitable for any type of vent including round and vertical air-vent types.
Because the clip is designed in the hook shape that’s why it attaches to the exhaust vent blades through a clip hook, and three feet are there that firmly supported on the vent to keep it fixed and these features makes it ultra-stable air-vent phone holder, even it won’t fall off on the rough or bumpy roads.
Also, its arms are wide enough to hold the 4-7 inches big or large smartphone; along with this, it can easily hold the almost all types of smartphone with thicker cases on it in between the width of 2.1-4 inches.
Not only this, it passed the military-grade sturdiness test, and it is sturdier more than 10X than normal phone holders, which makes it durable; means no worry about the sudden break.
Moreover, it has quick release button and adjustable clamp arms because of this you can easily insert or remove your phone with just single hand. Provide you the safer driving whether you are talking, navigation, listening to music or charging.
Here comes the windshield phone holder which is created by APPS2Car, it is very easily to install and use and its 13 inches long gooseneck helps you to set the perfect viewing angles as you want.
It features a top-quality aluminum designed gooseneck which is 13-inches long, which makes it ultra-durable and a long lasting product.
Besides, to support its extra long arm, it has very strong suction cup with switch; so that you can easily adhere to the windshield, dashboard, desk, cabinet etc.
Along with this, there is extra-dashboard support base is comes with this that provides it stability and makes it ultra-secure.
And all these things like: – long arm for better extension with sturdy suction cup base: industrial-strength suction cup which securely locks your smartphone on the windshield, dashboard even on the bumpiest roads.
As well as, the clamp can be open to 4 inches wide, which is why it is compatible with almost every smartphone sized under 4 inches.
Moreover, there is 360-degree swivel mount head comes with the screw-nut locking feature that ensures to hold your smartphone in the secure positioning and optimal viewing angles like landscape and portrait.
Here’s the another Dashboard, Windshield and Air-Vent phone mount for Audi RS3 which is made by VICSEED and it is made with best airliner PTFE PC material so that it can easily be mounted on all three locations firmly.
Besides, it has upgraded super strong sticky suction cup so that you don’t have to worry about its stability and to make it more stable they comes up with 2-step lock mechanism which provide extremely strong suction power.
And there is extra dashboard pad is available which provides smooth surface so the phone holder can stay more firmly and securely.
Along with this, its super wide arm can easily hold almost all smartphones and thick cases on it.
Additionally, they provides extremely flexible air vent clip that fits for Audi RS3 air vent type easily; and the silicone on the clip helps this vent mount to grip tightly and also protects the blades from scratching.
Moreover, it comes with adjustable telescopic arm and 360-degrees rotational ball-joint so that you can easily adjust your phone to any angles and any places.
Which is why, it is convenient to navigate, pickup phone calls without any kind of distraction during the drive.
This is the VICSEED phone holder and it is the perfect phone mount for PopSockets, Ring Phone Holder, Otter case etc.
Now you don’t need to take off your favorite phone case like PopSocket, Loop case, Kickstand, Ring Holder. You just need to insert your smartphone with socket grip into the groove of this air-vent phone holder and that’s it.
Besides, it features a tight internal structure that brings a strong clamping power to hold your smartphone firmly with sockets.
Along with this, this VICSEED air-vent phone holder has rubber cushions that creates the reliable protection to hold your valuable phone securely without even a single scratch.
Its air vent clip is built with metal that makes it sturdy mount and so that you can be easily and securely attached to vertical or horizontal air-vent types.
As well as, it is stable enough that you can drive your Audi RS3 over bumps and sharper turns and it won’t pop out or bounce off your smartphone. So that you can drive your vehicle completely distraction free.
6. LISEN Holder With 6 Strong Magnets Magnetic Cell Phone Holder With For Audi RS3 – Best Magnetic Mount
This is the magnetic smartphone holder that comes from LISEN, it is designed in a way that it can be mounted on the almost all types of air-vent types such as: Horizontal, Vertical & Round Air Vent Types.
It comes with 6 strong built-in magnets that can hold up to 8.0 lb(weight to 16 iPhone Pro Max). Because of these 6 ultra strong magnets it holds the phone firmly even big and large smartphones.
Also, it has been tested on the bumpy roads, sharp turns, and other tough driving condition and it always keeps the phone steady.
Along with this, LISEN phone mount is designed with lengthened “Hook (1.41inches)”, which locks deeper vent blades. As well as, the “Hook” is adopt upgraded PC+ABS material which makes it 3X sturdy.
There is soft shockproof rubber is covered in the bottom that’s why it attaches to the air-vent more tightly without a scratch.
This is a wireless charging phone holder made by ZEEHOO. This is great for travelers as they can use their device for navigational or calling purpose and with charging.
It has a charging power of Max 15W which is considered very fast charging power that’s why your smartphone does not get exhausted while using it.
There is built-in super capacitor, this is the upgraded featured and it will help to make your driving and charging smarter that means now no more worries if you forget taking your phone out of the mount when car is shut off.
This wireless car phone holder have very strong suction cup which securely attaches to the multiple locations like: – it can be installed on the dashboard, windshield and on air-vent.
As well as, it comes with quick release button so that you can easily place it on the phone holder by just one hand, and you can easily set the best viewing angles according to your desire; and these both features makes the driving safe.
Here’s it is the steering wheel phone holder for Audi RS3 which is designed by WixGear.
It is not only for steering wheel this is multi-functional phone holder that can easily be attached on headrest, bike handle bars, baby stroller or shopping carriage, office desks, refrigerators and many more edge defined surfaces.
It is like one mount for all because you don’t have to use a different-different mounts for every place you go, just take this with you like: – go to your car and then bring it in to your office desk and ou can go shopping with it and keep it on your baby stroller or shopping carriage.
Also, there are 2 cylindrical types of small and large diameter comes with this holder which helps you to mount your smartphone on the headrest of Audi RS3 easily.
This is very sturdy steering wheel phone holder which is made by the combination of premium quality rubber reinforced with extra strong durable plastic; and because of these two combined materials it makes it very strong and durable and gives the much needed strength to resist road vibration, minor impacts.
It is generally lightweight and very portable steering wheel mount that makes it extremely handy and useful anywhere and anytime.
This is another type dashboard clip phone holder that is come from CHRYMUM and also it is the multi-functional because you can also install it on Audi RS3’s dashboard, sun visor and rearview mirror.
This sturdy phone holder made with soft non-slip silicone pad and curved base. Due to its curved base it can be firmly attached to the car dashboard or curved surface, and the non-slip silicone pad prevents the car from scratching.
Along with this, it comes with spring buckle base that makes it strong and ultra-stable that it won’t shake off during the drive.
And you can easily mount 4-7 inches mobile phones on it; which means it is compatible with most of the smartphones.
Besides, there are 4 non-slip chucks are available that securely holds the smartphone that’s why your phone won’t fall off during the drive on bumpy roads, sharp turns, even on the sudden braking.
This is the cup phone holder that can easily fit on the Audi RS3’s cup holder, and it is designed by TORRAS.
Also, it features 15 inches long mount with aluminum gooseneck which makes this phone mount very durable, also it will give you the flexibility so that you can manage the viewing angles accordingly.
Besides, there is 0.6 inches of built-in aluminum rod is covered with 3 layers of heat-resistant ABS material that ensure durability and it doesn’t break easily.
The base of the mount is adjustable and it fits perfectly to the varying size cup holders like its upgraded adjustable base can be extended longer in size of 2.51 – 3.77 inches.
It is thick case and heavy phone friendly mount because it is suitable for all mobile phones of 4 – 7 inches with thicker cases of them width between 2.1-4 inches.
Along with this, there is premium silicone air cushions applied on the holder that provide the best protection for your expensive smartphone and hence prevent from scratches also.
This phone mount is adopted the latest 17 shaping process and have passed the Military-grade sturdiness test on the car phone holder, which makes it 50X stronger than the normal ones.
Wrap Up On Best Car Phone Holder for Audi RS3
I am sure you have found one holder that suits your RS3 most.
Make sure the higher the compatibility and built quality the more reliable it is for your Audi RS3 and in between the Dashboard, Windshield, Air Vent and Cup Holder you can have one which fits your budget, as mostly suggested for Audi RS3 are Dashboard and Windshield holder.
Dashboard and Windshield best car phone holder for Audi RS3 that I can recommend mounting they are reliable and perfectly works for your Audi RS3.
We will update them whenever the new version of the holder will come.
Let me know in the comment section below if you have any question in mind.
Check Them Out if you want phone mounts for : – Best Audi A5 Phone Mount, Best Audi A7 Phone Mount, Best Audi A8 Phone Mount, Best Audi Q2 Phone Mount, Best Audi Q3 Phone Mount, Best Audi Q4 Phone Mount.
- Smartphone Holder For Jeep Wrangler
- Semi Truck Phone Holder
- Smartphone Mount For Mercedes Benz
- Smartphone Mount For Toyota Prius