We already know that phone holders are very important, because the holders can handle your smartphone very easily and free you from any other disturbances.
This is especially helpful when you have to make or receive calls, follow the GPS path.
But there are very limited options available for the Ford edge; So it is very difficult to find the best phone holder for ford edge.
Ok Now, Here’s below i have found it for you and listed All 8 Best Phone Holder for Ford Edge so that you don’t need to waste your valuable time.
If you don’t have time to read the complete article.
Then here I am sharing the best phone holder for ford edge so that you can easily mount it on your ford edge and keep your smartphone safe and also enjoy the hand-free driving.
This VICSEED phone holder is very convenient for Ford Edge vehicles, that’s why it securely holds your smartphone in a place and never let your smartphone fall off; even when you takes sharp turn or drive on the rough roads.
Because it has very strong arms that tightly holds your cell phone and the ultra-sticky suction cup that makes this VICSEED phone mount fall-proof during the bumpy paths.
These are The 8 Best Phone Holder for Ford Edge
If you want an easy way to select the best phone holder for ford edge as per your requirement.
Then this list will help you as I have separated them according to the locations and mounting types (Magnetic or Clamp).
Holding Capacity: Fit for all phones with cases
Material Used: Aerospace grade Aluminum Edges & Carbon Fiber
Mounting Type: Air-Vent (All types Vertical, Horizontal and Circular)
If you really want to mount a smartphone holder on the air-vent location, then this is the great smartphone mount that can work almost every type of air vent whether Vertical, Horizontal or Round.
That’s why you can easily mount it on your Ford Edge it is very convenient for it and also it is designed in “hook” structured with 3 point support and that is the fall-proof locking mechanical design.
That ensures your smartphone stays on the air vent firmly as well as it is suitable for heavy phones.
Additionally, it has silicone pads on the 3-point support feet that will always protect your Ford Edge’s air-vents from scratches.
Apart from this, Andobil Ford Edge phone mount provides two different clips so that it can work for all types of customers.
And its adjustable support foot and very strong arms will always keep your smartphone in a place firmly; it doesn’t come loose, no matter how roughed the road is.
Holding Capacity: Fit for all phones upto 4 inches wide
Material Used: Top-Quality Aluminum Material
Mounting Type: Windshield & Dashboard
And here’s the Dashboard & Windshield phone holder for Ford Edge, so that if you want to mount in this type of locations then this APPS2Car phone holder is perfect.
It is design with top-quality aluminum material so that it can be very durable for long term.
Additionally, they designed its arms 13-inches long and that is enough for Ford Edge; whether you mount it on your dashboard or windshield it will easily be mounted there and it really sticks very well.
And because of its 13-inches very long gooseneck that’s why it is very easy to adjust angles in every way possible and hence it provides you the perfect viewing angles.
APPS2Car also added one quick release button which means you can use single hand to mount and take off your smartphone very easily this will definitely helps you to drive without any distraction.
And again it supports 360-degrees viewing angle that is also the reason why more than 700+ customers on Amazon.com loved it so much that they gave it 4.6 stars rating out of 5.
Holding Capacity: Fit for all phones upto 4.25 inches wide
Material Used: Best Airliner PTFE PC Material
Mounting Type: Dashboard, Windshield & Air-Vent (Multiple functional)
This cell phone holder is comes from VICSEED and this is the ultimate dashboard smartphone holder for your ford edge because of its super strong stickiness of suction cup and 2-step lock mechanism enhances its suction power.
It is not only for dashboard of your ford edge; you can also use it for windshield and air-vent mounting or even you can use it on your study table or office, that’s why it is called multi-functional phone mount for ford edge.
To provide it smooth surface it includes extra dashboard pad so that the VICSEED phone mount can stay more firmly and in more secure way.
Also, it is very easy to install and you can easily adjust the bottom leg of the phone mount according to your smartphone size; and super wide arms enables it to fit for up-to 4.25 inches wide all smartphones, even with thick cases on them.
Moreover, its 360-degree rotational ball joint and the adjustable telescopic arm give you the power to adjust the angles and orientation according to your wish.
Charging Capacity: Support Max 15W Fast Charging
Material Used: Aluminum Alloy
Mounting Type: Dashboard & Air-Vent
If you want such type of car phone holder for your ford edge that can not only hold tightly but also charge your smartphone wirelessly.
Because of these types of smartphone holder you don’t need to carry a phone charger all the times.
And also this CHGeek wireless phone holder is best when you want to go for the long drive and you need to check the locations on your smartphone, then this holder will be the best in this situation because; the drained battery will charge simultaneously.
Also, it featured built-in upgraded chip that intelligently identify your smartphone and charges with the fastest speed in safe way.
It is very fast charger mount that support max 15W charging capacity.
When connecting to the cable, the cell phone mount for ford edge will automatically clamp when phone is dropped in and also you can gently touch the 2-sided button of the mount to open the arms.
Moreover, when your smartphone is fully charged, then the wireless phone mount will automatically power off the charger and protect the battery of your phone.
Holding Capacity: Fit for all phones even for heavy smartphones
Material Used: Upgraded PC+ABS material (Hook)
Mounting Type: Supports Vertical and Horizontal Air-Vents
This is the magnetic air-vent phone holder for ford edge designed by LISEN, because of the beautifully designed mount it enhances the overall interior design of ford edge.
This smartphone holder is convenient for ford edge’s air-vents and due to its “closed-look hook shape” it holds the air-vent blades firmly that will make it never-fall phone mount.
It features 6 N52 strong built-in magnets that can easily hold heavy or bulky smartphones even with case on them that made it really fall-proof magnetic mount for your phone.
If your air-vent blades are deeper then this will easily mount there because it is designed with Lengthened Hook which is 1.41-inches long that means it can easily lock deeper vent blades.
Additionally, its hook is made with PC+ABS material that makes it 3 times sturdier and hence becomes durable phone holder.
Also, its bottom covered with soft shockproof rubber that’s why it attaches more tightly without any scratch even on the rough roads.
Holding Capacity: Fit for all phones or GPS devices which are between 6-12mm thick
Material Used: Silicone Material
Mounting Type: Dashboard
Above I have mentioned holder that clamp your phone with their strong arm safely but if you want to put your smartphone on the holder rather than clamping then this is for you.
And one more reason: if you are a type of person who want to remove and install the phone holder in different positions in some short time period on your ford edge’s dashboard then with this Loncaster Ford Edge Phone Mount you can do that easily.
It is very easy to install and remove without messing up the dashboard.
And because of its durability there are more than 17800+ customers loved this holder and gave it 4.3 stars rating out of 5; that shows it is trustworthy.
Also, it comes with its soft silicone-textured bottom and sticky pads that makes it very stable and totally slip free; that can protect your smartphone against bumping, scratching or fall off even on the emergency braking, sudden stop and sharp turn.
Moreover, it is a washable & reusable phone holder because of the bottom of this holder is made from high-tech adhesives, that’s why just rinse with water and simply dry it, after some time it will work same like a new one.
Holding Capacity: Fit for all phones of 3-7 inches
Material Used: Silicone Material
Mounting Type: Dashboard
This is another dashboard pad holder but it is with clip that gives you the extra holding supports to even more protect while driving on the rough and bumpy paths.
To make it ultra stable and fall-proof it has triple reinforcement on dashboard, large silica gel base and also a circle of adhesive silicone film, as well as a suction cup which is why it attaches on the dashboard firmly.
There is also high quality spring featured, as well as two ends of clamping with non-skip silicone to make it very secure enough so that it won’t fly out even when taking a sharp turn, sudden stop or accelerate.
It is very easy to install on ford edge and also sticky silicone material is not permanent attachment to the dash, which means it can be easily taken off and after a flush; the silicone bottom will become sticky as new.
So that you can pull off and put on the best position according to your viewing angle.
Holding Capacity: Fit for mobile phones width of 2.01 – 3.54 inches
Material Used: heavy base and durable plastic
Mounting Type: Supports 2.4 To 4 inches diameter of cup holder
This is the cup phone holder for ford edge, if you want your smartphone remains safe in one place but not in front of your eyes then this is the great for you.
It features the adjustable gooseneck so that it can be very easy to adjust the height and also the viewing angle, as well as its gooseneck is up-to 8-inches long that makes easier access of your phone.
It is very reliable phone mount for ford edge which is made with an adjustable heavy base and durable plastic, and also you can extend its arms for wider depth and longer length which means it can fit cup holders of 2.4 To 4 inches by twisting the knob.
Additionally, it supports 360-degree rotation so that you can easily adjust its angles of viewing to meet the best angles angle that will help you to comfortable operate your smartphones without any distractions.
NOTE: This smartphone holder cannot fit the phone with battery case.
Wrap Up On The Best Phone Holder for Ford Edge
I have covered all the best holders for ford edge on the different mounting positions such as: for Dashboard, Windshield, Air-Vent, Cup Holder and Clip Holders so that you can choose them according to your need and behalf of your choices.
And I hope now at this time you have definitely find out the best ford edge phone mount accordingly.
Yeah you can know much more about the details of each product on Amazon.com and it will genuinely show you how trustworthy the product is.
If there’s more you want to know about this products so that you can simply comment down below or you can also do research by yourself.
This is the video format of ford edge phone holder so that you can understand clearly what type of these mount actually looks: –
- Jeep Wrangler Cell Phone Holder
- Semi Truck Smartphone Mount
- Mercedes Benz Mobile Phone Mount
- BMW Smartphone Holder
FAQ’s Of ford edge
Here i answered additional question that can clear your all the doubts, so that you can easily buy without being worried about anything.
Ans: – Above I have already mentioned the best cell phone holder for ford edge for all various edge. These phone holders contains all ideal phone holder qualities like: – Very high built quality, reliable as well as their positions, because all phone holders positions is very user friendly. And that’s why you can easily use smartphone to perform various different tasks like to call someone, to follow the paths by GPS, you can easily use camera to record videos, to listen your favorite music/playlist and many other activities without being distracted while driving.
Ans: – Now-a-days it became very easy to install cell phone holders in ford edge. You only need to fix holder on the dash and sometimes you also need additional screws to fix it on the dash tray. If everything is fine that is the sign that your holder is installed with sturdiness. Now you can use your smartphone easily without being worry of phone falling, even while driving on the rough roads. But if your holder have suction cup, then the installing process can complete within a minute or less. Just clean the surface then put the suction cup and lock it accordingly, that’s it.
Ans: – Yes, you not use them with most of the of the cars, because edge’s phone holder is specifically made for their compatibility, so there are very few chances that we can mount holder in other cars. There are universal commonly holders are available like: – holder with suction cup, windshield adhesive holder that you can install it on your other cars.
The answer is yes because it can be very important to make your phone mount very stable so that you can easily access your smartphone without any kind of worry or distractions.