There are many moments when you have to drive your car (Ford Expedition) and at the same time you have to do some cell phone related tasks like calling someone, navigating via GPS and more.
Then you must have thought about mounting the cell phone holder, but the trouble starts from here.
Because there are very few holders available that are fully and exclusively fitted to the Ford Expedition.
This is why you have to do seriously long research for the Ford Expedition model.
So to save your precious time; I have done research and here I have listed these 9 best iphone holder for ford expedition that you are looking for.
These are the Best iPhone Holder for Ford Expedition
These are some of the best iPhone holder for ford expedition that can help you to use your cell phone easily and gives you freedom to take calls while driving.
This phone holder is created by Scosche which is specially made for Ford Expedition (2018 to 2020).
In addition, it is a very fast wireless mobile charger that allows you to charge your phone very quickly.
It is a Qi-certified holder, so if you have Qi-enabled phones; Your smartphone will charge up to 10-watt and Fast Charge is compatible with Apple, Samsung and Google devices.
Also, it is very easy to mount and its adjustable arms hold devices up to 3.5 inches wide.
Moreover, it allows you to mount your cell phone in both portrait and landscape angles.
You should not worry too much about this holder as it comes with a lifetime limited warranty.
This magnetic phone holder is also made by Scosche and specially built for Ford Expedition (2018-2020).
It is also Qi-certified which ensures up to 10-watt secure wireless charging with Apple, Samsung and Google cell phones.
Also, you can easily install it on your dashboard with no holes or damage to your vehicle.
Also, you can easily mount your smartphone and tablet because of its ultra powerful Neodymium magnets.
In addition, you can adjust your smartphone at any angle (360 degrees) and you can rotate according to the view you want.
It comes with a lifetime limited warranty so that you don’t have problems after purchasing it.
This magnetic smartphone holder is also built by Scosche. This holder is compatible with the 2018 to 2020 Ford Expedition.
Besides, you can quickly and safely install it on your dashboard without any holes or damage to your car.
You can mount and remove your smartphone with just one hand and it comes with 2 interchangeable trim rings (Black & Silver) to coordinate with your phone or vehicle.
This phone holder has Neodymium magnets that generate very strong magnetic forces, so you can easily mount your smartphone as well as tablet.
Moreover, strong magnets make your phone stable and it also reduces vibration on bumpy or rough paths.
Apart from this, you can also easily mount your phone vertically or horizontally and due to lifetime limited warranty you can buy it without any doubt.
This superb cell phone holder is created by VICSEED and is loved by more than 900+ customers on Amazon.com. Besides, it is the perfect fit for the Ford Expedition’s air vent.
This holder is designed as an “up-down-baffle and bayonet lock”, so that the holder firmly holds the air vent outlet blade and ensures that it never falls on bumpy roads or under any conditions.
Also, it contains 3rd generation upgraded most strong 6 magnets, and they are 50% stronger than standard magnetic phone car mounts, which can easily hold your smartphone, even heavy ones.
Also, the phone mount reduces vibrations generated during rough or bumpy drives, and powerful magnetic force makes your smartphone very stable, so that you don’t need to make any adjustment between drive.
Moreover, you can easily rotate 360 degrees as it allows you to quickly switch between portrait and landscape view, so it becomes more convenient than ever to receive/make calls and use GPS navigation.
Note: if you put 2 metal plates in the overlapping way, then the magnets power will become 2 times strong.
This strong smartphone holder made by Mpow and likes by 3000+ customers on Amazon.com. Besides, customers rated it 4.3 out of 5; that shows this product is very reliable.
In addition, it is very beautifully designed with an advanced black mirror that highlights the beauty of the Ford Expedition.
Moreover, its vent clip is 20x more stable than other dual-size clips, so you need to worry about the phone moving and falling whenever you’re driving on bumpy roads.
Also, the air vent mount has a screw-lock system built with heat-resistant materials.
In addition, it comes with 2 adjustable legs at the bottom; You can move them up and down to find the correct position for small or large phones.
Also, it has a release button on either side of the holder so that you can easily mount and remove your phone: you can do this with both right and left hands.
Its 27 mm reserved charging port allows you to charge your phone with ease.
Also, you can adjust its viewing angle around 360-degrees (in landscape or portrait mode), and you can also mount it on another car than the Ford Expedition, as the phone holder fits 99% of the air vent slats (Horizontal and Vertical both).
This stunning dashboard holder is made by GESMA and is designed specifically for the Ford Expedition dashboard and therefore remains always on your eye level view.
You don’t need to turn your neck to see the GPS or phone interface and this quality makes driving more safer than ever.
Besides, it easily fits for the edge of the dashboard of thickness <2 inches.
Also, it is an upgraded 50x strong holder, which is designed with curved base which matched with the car dashboard perfectly, that’s why it ensures zero waggle of your smartphone even in a rough road.
Moreover, the spring buckle can mount almost all the mobile phones from 4 to 7 inches that means it is compatible with iPhone 12 Pro, 11 XS Max, Galaxy S10 Plus etc.
Note: Please check the thickness of your dashboard before ordering. The thickness of the dashboard should be within 2 inches.
7. SCOSCHE Wireless Charger With Smartphone Holder For Ford Expedition – Best Wireless Charger Holder
This magnetic holder comes from SCOSCHE and is also a Qi-certified wireless charger, which means, if your device has Qi-enabled, you can charge your smartphone very fast (up to 10 watts of charging power) wirelessly.
Also, its 4 extra powerful Rare-Earth Neodymium Magnets that hold your smartphone securely, so that you can drive comfortable even on rough paths.
Besides, the open structure of the holder allows air to flow through the vehicle vent without any obstruction and hence your smartphone remains unaffected by the air temperature.
Also, it can rotate up to 360 degrees so that you can easily achieve your perfect angle of view and also it has air vent stabilizer that works to stabilize holder and reduce vibrations while drive on the bumpy paths.
This device is designed by OQTIQ and comes with a very long 13-inch gooseneck so that you can easily mount it on the windshield of your Ford Expedition.
Besides, it also has an anti-shake stabilizer, which minimizes the vibrations of the smartphone generated during a rough drive, and the anti-shake stabilizer that attaches to the dashboard makes it very compatible with the Ford Expedition.
Also, it comes with reusable gel pads that adhere to any flat or curved surface of your Ford Expedition’s Dashboard as well as Windshield.
It’s very sticky suction cup attaches strongly to windshield or dashboard, so that your smartphone will not fall on the bumpy routes and you can comfortably drive your Ford Expedition.
After a long period of time if you find that the adhesive is not working very well, you can simply wash it, air dry it and reattach it to the windshield or dashboard.
Moreover, you can easily take off your mobile phone. Simply press the release button on the back of the cradle, and then clamp arms will smoothly slide to release your device. That’s it.
This tablet dash mount is made by PADHOLDR, the holder suited for Ford Expedition (1997-2004).
It is a ford expedition iPad mount and you can easily mount almost every tablet.
With this purchase it includes: Tablet Holder, Vehicle Specific Bracket, Fully Adjustable 6. Inch Arm, Anti Vibration Backing & Complete Instruction kit this will guide to install iPad mount for ford expedition.
FAQ’s of Ford Expedition Phone Mount
1. How do I get my phone to stick to my Ford Expedition Dashboard?
Ans: – There is much customized dashboard of Ford Expedition and hence there is no space to mount a suction cup phone holder on dashboard.
Therefore you have to stick a dashboard clip mount that is located exactly behind the steering wheel.
There you can easily mount a phone mount for Ford Expedition.
2. Why specially built Ford Expedition phone mount are best?
Ans: – Yes, Ford Expedition phone mount are the best because they are specially built for this particular vehicle that’s why they make the holder as much as convenient for Ford Expedition.
They customize these type of holders to work perfectly and they make changes as their mounting positions and according to vehicle.
3. How you can reattach gel pad with the help of reusable gel adhesive?
Ans: – Yes, this is very easy whenever you feel like the holder is not sticking properly during the long period of time because of the dust or anything.
Then carefully remove it and then simply wash it with the lukewarm water and then air-dry it and then re-attach it to the windshield or dashboard and that’s it.
My Thought On The Best iPhone Holder for Ford Expedition
While making a purchase for the best iphone holder for ford expedition or ford expedition phone mount, you must check the compatibility to your ford expedition model and I have listed various types of phone holder so that you can choose them according to your choice.
But while driving, I feel that is much needed to mount most compatible ford expedition phone mount so that you don’t need to be worry during the drive. The selection of a dashboard, air vent and windshield should be your choice.
I will update them if any upgraded version of phone holder comes for the Ford Expedition car.
- Jeep Wrangler Phone Holder
- Semi Truck Phone Holder
- Mercedes Benz Phone Holder
- Toyota Prius Phone Holder