We knows that, there are many types of accessories available that makes driving safe.
And one of the most needed accessories is “Smartphone Mount”.
There are a few reasons for this, the phone holders allows you to see your phone’s GPS while driving safely.
But for BMW F22 there are very few phone holders are available that are fully compatible with BMW F22.
That’s why i have done the reasearch more than over 20+ hours and comes up with these 7 Best BMW F22 Phone Mount that are perfectly compatible with it.
And i have listed different-different types of phone mount for BMW F22 so that you can easily choose according to your desire or need.
These are The 7 Best Car Phone Holder for BMW F22
These are some of the best car phone holder for BMW F22 that can help you to use your cell phone easily in your F22 and gives you freedom to take/answer calls while driving.
Now, this smartphone holder is made by Andobil, it is the 3-in-1 phone holders which can be mounted on the Dashboard, Windshield and Air-Vent Types and it is the perfectly compatible with BMW F22.
Also, it comes with newly invented suction cup which have the suction power increased by 3 times because it features three layers of new nano-silica gel material and adopt a two-step locking mechanism which makes it extremely stable phone mount.
Along with this, its holding arms designed in triangular structure that’s why it holds your smartphone firmly like it fixes your phone from left to right to the bottom of the three directions firmly.
Besides, it has soft silicone on the holding arms & airbag design these features provide 100% full protection for your smartphone that means it won’t scratch your phone even when you’re driving on the most bumpy roads.
Moreover, Andobil BMW F22 phone holder has extendable long arm and 360-degree swivel head, it keeps your phone always in the best viewing angle so that you can easily use your smartphone for GPS navigation & answer or make phone calls without being distracted while driving.
Now, this is the air-vent phone mount which is designed by TORRAS, it is a universal air-vent mount that is fully compatible with BMW F22’s air-vent types.
And there are two types of clips comes with this holder. One is designed for common horizontal vents; and the other type of clip is a universal clip, which is suitable for any type of vent including round and vertical air-vent types.
Because the clip is designed in the hook shape that’s why it attaches to the exhaust vent blades through a clip hook, and three feet are there that firmly supported on the vent to keep it fixed and these features makes it ultra-stable air-vent phone holder, even it won’t fall off on the rough or bumpy roads.
Also, its arms are wide enough to hold the 4-7 inches big or large smartphone; along with this, it can easily hold the almost all types of smartphone with thicker cases on it in between the width of 2.1-4 inches.
Not only this, it passed the military-grade sturdiness test, and it is sturdier more than 10X than normal phone holders, which makes it durable; means no worry about the sudden break.
Moreover, it has quick release button and adjustable clamp arms because of this you can easily insert or remove your phone with just single hand. Provide you the safer driving whether you are talking, navigation, listening to music or charging.
Here comes the windshield phone holder which is created by APPS2Car, it is very easily to install and use and its 13 inches long gooseneck helps you to set the perfect viewing angles as you want.
It features a top-quality aluminum designed gooseneck which is 13-inches long, which makes it ultra-durable and a long lasting product.
Besides, to support its extra long arm, it has very strong suction cup with switch; so that you can easily adhere to the windshield, dashboard, desk, cabinet etc.
Along with this, there is extra-dashboard support base is comes with this that provides it stability and makes it ultra-secure.
And all these things like: – long arm for better extension with sturdy suction cup base: industrial-strength suction cup which securely locks your smartphone on the windshield, dashboard even on the bumpiest roads.
As well as, the clamp can be open to 4 inches wide, which is why it is compatible with almost every smartphone sized under 4 inches.
Moreover, there is 360-degree swivel mount head comes with the screw-nut locking feature that ensures to hold your smartphone in the secure positioning and optimal viewing angles like landscape and portrait.
Here’s the another Dashboard, Windshield and Air-Vent phone mount for BMW F22 which is made by VICSEED and it is made with best airliner PTFE PC material so that it can easily be mounted on all three locations firmly.
Besides, it has upgraded super strong sticky suction cup so that you don’t have to worry about its stability and to make it more stable they comes up with 2-step lock mechanism which provide extremely strong suction power.
And there is extra dashboard pad is available which provides smooth surface so the phone holder can stay more firmly and securely.
Along with this, its super wide arm can easily hold almost all smartphones and thick cases on it.
Additionally, they provides extremely flexible air vent clip that fits for BMW F22 air vent type easily; and the silicone on the clip helps this vent mount to grip tightly and also protects the blades from scratching.
Moreover, it comes with adjustable telescopic arm and 360-degrees rotational ball-joint so that you can easily adjust your phone to any angles and any places.
Which is why, it is convenient to navigate, pickup phone calls without any kind of distraction during the drive.
This is the VICSEED phone holder and it is the perfect phone mount for PopSockets, Ring Phone Holder, Otter case etc.
Now you don’t need to take off your favorite phone case like PopSocket, Loop case, Kickstand, Ring Holder. You just need to insert your smartphone with socket grip into the groove of this air-vent phone holder and that’s it.
Besides, it features a tight internal structure that brings a strong clamping power to hold your smartphone firmly with sockets.
Along with this, this VICSEED air-vent phone holder has rubber cushions that creates the reliable protection to hold your valuable phone securely without even a single scratch.
Its air vent clip is built with metal that makes it sturdy mount and so that you can be easily and securely attached to vertical or horizontal air-vent types.
As well as, it is stable enough that you can drive your BMW F22 over bumps and sharper turns and it won’t pop out or bounce off your smartphone. So that you can drive your vehicle completely distraction free.
6. LISEN Holder With 6 Strong Magnets Magnetic Cell Phone Holder With For BMW F22 – Best Magnetic Mount
This is the magnetic smartphone holder that comes from LISEN, it is designed in a way that it can be mounted on the almost all types of air-vent types such as: Horizontal, Vertical & Round Air Vent Types.
It comes with 6 strong built-in magnets that can hold up to 8.0 lb(weight to 16 iPhone Pro Max). Because of these 6 ultra strong magnets it holds the phone firmly even big and large smartphones.
Also, it has been tested on the bumpy roads, sharp turns, and other tough driving condition and it always keeps the phone steady.
Along with this, LISEN phone mount is designed with lengthened “Hook (1.41inches)”, which locks deeper vent blades. As well as, the “Hook” is adopt upgraded PC+ABS material which makes it 3X sturdy.
There is soft shockproof rubber is covered in the bottom that’s why it attaches to the air-vent more tightly without a scratch.
This is the cup phone holder that can easily fit on the BMW F22’s cup holder, and it is designed by TORRAS.
Also, it features 15 inches long mount with aluminum gooseneck which makes this phone mount very durable, also it will give you the flexibility so that you can manage the viewing angles accordingly.
Besides, there is 0.6 inches of built-in aluminum rod is covered with 3 layers of heat-resistant ABS material that ensure durability and it doesn’t break easily.
The base of the mount is adjustable and it fits perfectly to the varying size cup holders like its upgraded adjustable base can be extended longer in size of 2.51 – 3.77 inches.
It is thick case and heavy phone friendly mount because it is suitable for all mobile phones of 4 – 7 inches with thicker cases of them width between 2.1-4 inches.
Along with this, there is premium silicone air cushions applied on the holder that provide the best protection for your expensive smartphone and hence prevent from scratches also.
This phone mount is adopted the latest 17 shaping process and have passed the Military-grade sturdiness test on the car phone holder, which makes it 50X stronger than the normal ones.
What Do You Need To Check For The Best Phone Holder (BMW F22)
You are familiar with how you have to use cell phones while driving for different purposes like to make/attain phone calls, to use for navigation, and you know that how difficult and dangerous it is meanwhile driving.
Therefore, I have listed below five features that you should always check with the phone holder.
The very first thing you should check is: what type of cell phone holder is compatible with your BMW F22 according to your F22 model.
Check that if you install it on your BMW F22 then it shouldn’t scratch or damage your vehicle.
You need to be aware of the compatibility of the holder: if you install holder then it should hold your smartphone tightly, even on the rough roads and phone should not fall during the bumpy paths.
Check compatibility for all the mounting positions like: – which phone holder supports your car’s dashboard most, and likewise for your windshield, Air Vent Holder and a Cup Phone Holder.
You should be aware of what type of materials used to make holder, so that you can confidently choose best for you.
Holder’s quality should not be made cheaply material, so that it won’t break and stay longer, and make sure that holder can easily hold cell phones even the large/heavy one on the bumpy/rough routes.
Release & Lock
Always choose easy to release and lock mechanisms phone holder so that you can do while driving without being distracted from your track.
If holders have one touch release and lock button then this is just perfect.
Because of this you can mount or take off your smartphone anytime, anywhere you want with one handedly without any difficulty.
Angle of Rotation
Rotational ability also matters, always check what angle does it rotates, in which direction it can rotate, normally almost all the cell phones holders comes with 360-degree rotational feature.
Also choose the holder that can securely hold your phone vertically and horizontally both, so that you can adjust it according to your desired view.
How long holder will work, it also very much depends on the installation process of the holder. Holder should be perfectly installed without any scratch or damage to your vehicle.
Also installing process should not be complicated.
Note: if you frequently change holder’s position then the performance will be affected and may be holder will fall off.
Wrap Up On Best Car Phone Holder for BMW F22
I am sure you have found one holder that suits your F22 most.
Make sure the higher the compatibility and built quality the more reliable it is for your BMW F22 and in between the Dashboard, Windshield, Air Vent and Cup Holder you can have one which fits your budget, as mostly suggested for BMW F22 are Dashboard and Windshield holder.
Dashboard and Windshield best car phone holder for BMW F22 that I can recommend mounting they are reliable and perfectly works for your BMW F22.
We will update them whenever the new version of the holder will come.
Let me know in the comment section below if you have any question in mind.
Check Them Out if you want phone mounts for : – Best BMW F10 Phone Mount, Best BMW i3 Phone Mount, BMW i3 Phone Holder, Best BMW E46 Phone Mount, Best BMW 2 Series Phone Mount, Best BMW 3 Series Phone Holder, Best BMW 4 Series Phone Mount, Best BMW 5 Series Phone Holder, Best BMW X1 Phone Holder, Best BMW F30 Phone Mount.